- » Sanding tools for different workpiece thicknesses
- » Sanding Tools
- » Tools
- arminius.de
Sanding tools for different workpiece thicknesses
The two-part profile sanding tool can be supplied with and without fine adjustment mechanism.
ARMINIUS 5+5
Adjustable sanding width 10-70mm,
high level of flexibility as different profiles can be combined
ARMINIUS 5+5
Adjustable sanding width 10-70mm,
high level of flexibility as different profiles can be combined
ARMINIUS 5+5
Detail picture
Platinum 7+7 adjustable
for e.g. stairway steps
Platinum 7+7 with
vertical adjustment
stairway steps
vertical adjustment
detail picture
Quality without compromise:
- Continuous use[li]All profiles possible
- Even for sharp-edged profiles
- Short set-up times
- Quick replacement of a prefabricated abrasive fitting (approximately 1 minute per tool)
- Maximum tool quality
- Limitless in terms of dimensions (tool and sanding element)
- Changeover to mechanical sanding process without loss of quality
Advantages of the fine adjustment mechanism
- Adjustment of the workpiece height up to 5 mm
- Scale increments of 0.05 mm can be read off
- Setting is made on the spindle
Can be used on the following machines
- CNC machine
- Throughfeed machine, one-sided
- Double-end tenoner
- Automatic moulders
- Spindle moulders
Recommended use
- Recommended feed speedUp to 20 m/min.
- Recommended rotational speed
(dependant on diameter)1.200 - 1.500 - Max. rotational speed
(dependant on diameter)1.500
Accessories
- Fine adjustment mechanism
Profile guarantee
We guarantee a workpiece tolerance of +/- 0.05 mm for the profile accuracy.
Tool life travel
Our prefabricated abrasive fittings achieve a tool life travel of up to 6,000 running metres, depending on the profile accuracy of the milling process and the set chip removal, which is appropriate for the grain sizes used.
- Grit sizeP40 - P600
- Chip removal0,1mm - 0,2mm
- Tool life travelUp to 6,000 rm.
Cost-effective thanks to:
- Extremely low cost of the abrasive layer per running metre
- Guaranteed tolerance of +/- 0.05 mm for the profile accuracy
- No reworking
- Long tool life travel
- Low storage costs
- Combination options